Moisture Meter for Firewood, Wood Moisture Meters for Walls, Firewood Floor Humidity Detector Lumber Humidity Tester Paper Cerimic Ceiling Firewood Cardboard Humidity Building Material (Orange01)

Instant and Precise Readings It reads to a depth of approximately 12 mm into the slab Plus the current reading can be captured via the hold functionTips one For best results of wood moisture content Push the Pins deep into the material make sure Pins are in contact with the material wall wood or hardwoodTips two Pins sense and measure along their full length so that Pins penetrating a dry material through a wet outer surface can read moisture contentTips three Pins sense and measure along their full length so that Pins penetrating a dry material through a wet outer surface can read moisture contentFeatures and Benefits RDINSCOS Moisture Meter easily know if the woodwall moisture content is Dry Moist or Wet Bright LED display for clarityAutomatic power offNo More Smoky Slow burning Fires Quickly easily and affordably find out if pieces of firewood are ready to burn at the woodpile before carry it inIt read 0 When the wood slab was too dry to register readingsthe wood at this moment is an insulator leading to a nonconductive between the two pinsLonger Battery Life Low power requirements enable up to 500 tests on one set of AA batteriesFour Measurements Easily set the wood species from hardwood to softwood you need to measure Offers a Relative Moisture Content comparative measurement