SaiDian 1Pcs ARGB Hub Controller Computer Case Fan Splitter 5V 3-Pin PWM Temperature Controller

REMOTE CONTROL BUTTON FUNCTION 12 color keys corresponding key color light Mode switch key Light green key bottom middle key Press and hold for 3 seconds Switch to AURA SYNC mode of the main board Press and hold for 3 seconds to switch to remote control mode the factory default mode is remote control mode Lock code key Press and hold the purple key for 3 seconds the bottom left key The light flashes once and the code is locked successfully Note after the lock code key function is activated The remote controller and the controller complete one to one lock code Other remote controllers will not be able to remotely control the controller Please take good care of the remote control to avoid losing it Unlock key Long press the white key for 3 seconds the bottom right key The light flashes once and the unlocking is successfulfactory default is unlock CONTROLLER INSTALLATION Connect the controller power cable to the SATA interface of the PC power supply Connect the controller 5V ARGB control line to the main board supporting aura sync function 5V ADD HEADER interface ordinary motherboard does not need to be connected Connect the CPU FAN to the red CPU FAN seat of the controller Connect the CPU FAN PWM cable of the controller to the CPU FAN base of the motherboard The RGB FAN 4PIN 3PIN cable is connected to the black RGB FAN seat of the controller The 5V 3PIN control line of RGB FAN is connected to the ARGB seat of the controller Fix the controller in a proper position in the cabinet by dipping glue or magnetic suction Package Includes 1Pcs board and 4Pcs connecting wires