Sinefine PCI-E to USB 3.2 Expansion Card,3.2 gen2 10Gpbs (3X USB C, 1x USB A, 1x USB Type E A Key), USB C PCI Express Card, A-Key 20 Pin Header for Type C Front Panel Mount Adapter

Specification Extend Ports 3 USB Type C 32 1 USB A 20 1 USB Type E Host Interface PCI Express PCIE 302010 Data Transfer Rate USB 32 Up to 10 Gbps Output 5V3A MAX each USB port Note 1 Not equipped with a Lowprofile bracket The overall size of the PCIE card is 343in in length and 315 in in height The height of the iron sheet is 071 in It doesnt apply to small computers and servers chassis like 1U and 2U 2 Install the driver before inserting the USB cardIn addition for some special motherboards Windows 1011 System there is no way to recognize the card Please contact your motherboard vendor for additional USB drivers 3 Make sure PCs motherboard have empty PCIE slot for PCIE USB cards 4 Make sure the power has been disconnected before installation 5 Do not use in a humid environment otherwise it will affect the connection of the device Frequently asked questions Why 10Gbps speed not achieved 1Please contact the manufacturer of the motherboard and check the following information 1 PCIE slot protocol requires PCIe version 30 or higher 2 The lanes assigned to the PCIE interface are x4 or higher The lanes assigned to the PCIE interface are x4 or higher x1x2 channels are also available but the speed will not be reached 2When using a USB pcie card USB devices have performance limitations on the throughputperformance of the cards data transfer This depends on the USB protocol and cable material of the end deviceyou can check if your external USB device supports 10Gbps bandwidth by consulting your external USB device vendor Why is this USB 32 port detected as USB 31 by the computer system According to the latest USBIF standard the USBA ports on this card is USB 32 Gen 2x1 USB