WSDCAM Wireless Vibration Alarm with Remote Control Anti-Theft Alarm Bike/Motorcycle/Vehicle Security Alarm, 110db Loud, Door and Window Alarm

The factory default highest sensitivity the first level Setting the sensitivity you can do the following operations 1 Press and hold the Disarm key of the remote control Ignore the prompt tone The remote controls LED turns off for about 3 seconds and lights up again after 3 seonds then release the Disarm key and press the doorbell key to adjust the sensitivity level 2 When its in the highest sensitivity the alarm will sound a long quotBiquot Press the doorbell key once the sensitivety level turns to the next level and the alarm sound a short quotBiquot When its in the tenth level if press one more time it turns to the first level The higher the level the less sensitive Host 2AAA alkaline batteries to operate not included An 12V27A alkaline batteries of the remote control to operate Installation Select windows and doors to the installation location with water and cloth to clean the mounting surface the doublesided adhesive tape on the bottom and then this machine is attached to the clean position Application Functionremote control noise maker Arming and disarming Alarm triggered Emergency functions When you are at home when you encounter an intruder or other emergency situations the remote control is pressed on the key host will ring alarm Emergency function keys are valid in any mode Doorbell function Increase the remote control and alarm You can increase the remote control and alarm depending on your needs see the instruction set