Blackmagic Design HyperDeck Shuttle HD
The desktop HyperDeck that's the perfect live production clip player and master recorder!
HyperDeck Shuttle HD is a recorder and player that's designed to be used on the desktop! That means it's more than a master recorder as it can also be used as a clip player. The large search dial is perfect for scrolling through lots of media to find the clip you want to play. You get support for ProRes, DNx and H.264 files in NTSC, PAL, 720p and 1080p video formats. The HDMI connections allow connection to switchers, cameras and monitors. Plus SD cards, UHS-II cards and USB-C external disks can be used for recording and playing media. HyperDeck Shuttle HD uses the same design as ATEM Mini Extreme, so it's a perfect combination to use as a media player. It even has a built in teleprompter!
Elegantly Designed Professional Broadcast Deck
HyperDeck Shuttle HD is perfectly designed for the desktop. This means the front panel can be operated with a single hand! The gentle angle allows your hand to rest on the search dial, and the control buttons are positioned under your fingertips. The design is the same depth and angle as ATEM Mini Extreme, so they match perfectly when used together! Scrolling media is fast as the machined metal search dial has a natural inertia, and the soft rubber surface feels nice to the touch. That's perfect when you're searching through lots of media. Plus, the buttons are the same design as traditional broadcast decks. The rear panel includes all video, power, network and control connections.
Perfect for Live Production Mastering and Clip Playback!
Mastering Recorder
With support for H.264, ProRes and DNx files, you can record true broadcast masters! You can even select between PCM or AAC audio. That's perfect for higher quality mastering when used with ATEM Mini switchers. You get everything needed to send shows to broadcasters and for uploading to YouTube.
Media Player
The large search dial lets you visually browse your clip library. Then you can use the previous clip button to cue to the start of the clip. After playing, you can use the clip button to stop the playback at the end of the clip. ATEM switchers can even remote control HyperDeck Shuttle via Ethernet!
Traditional Broadcast Deck Controls
HyperDeck Shuttle includes a control panel that's very fast to use. The buttons are similar to a traditional broadcast deck. Simply press the record button and you instantly start recording the video input to a file! It will record in the file format that has been set in the record menu. There are other buttons for playback, to cue to the start of the clip and to move to the next clip. The buttons have been custom designed by Blackmagic Design for the highest quality. The large machined metal search dial supports shuttle, jog and scroll so you can find clips fast. Plus all deck control functions can be triggered remotely using the Ethernet network.
Supports SD cards and UHS-II cards.
HyperDeck Shuttle supports recording to common SD cards and UHS-II cards so you don't need expensive custom media. SD cards are the perfect choice for broadcast media because they are small and very affordable. Plus, you can even record to external USB disks! When using USB disks, if you use a USB hub, or Blackmagic MultiDock, you can even record on multiple disks for non stop recording! When using H.264, the files are so incredibly small you get very long recordings even on smaller low cost cards. This means you can record up to 157 hours of H.264 in 1080p59.94 on a 1TB card. That's over 6 days of recording in HD using a single 1TB card!
Record to External USB-C Media Disks
If recording to other types of media is required, the USB-C expansion port lets you plug in an external flash disk for recording. USB-C flash disks have unlimited capacity because they can be physically larger than an SD card or SSD. Plus, it's even possible to record to a disk array you'll use for editing, so you don't need to waste time copying files before starting post production. Just move the disk over to a computer and instantly start editing! You can even add a Blackmagic MultiDock 10G that has 4 separate SSD media slots, so you can add compatibility with SSD media to the HyperDeck Shuttle! There are also options for managing external disks in the settings menu.
Popular ProRes, DNx and H.264 Files!
HyperDeck Shuttle HD supports the most popular codecs in use today! You get broadcast quality DNx and ProRes file formats. However you also get space saving H.264 when recording in NTSC, PAL, 720p, 1080p plus even true 1080i interlaced formats. That means you get tight 60:1 to 285:1 compression ratios for very small files at full broadcast quality. Plus you can choose uncompressed PCM audio, or even AAC audio when uploading files to YouTube. HyperDeck Shuttle HD supports both ExFAT used on Windows and HFS+ used on Mac disk formatting standards, so disks can be mounted and read on both platforms. You also
- Tabletop HyperDeck! Perfect for playing clips in live production and recording masters
- Designed for tabletop use with one hand, the front panel can be operated with one hand. Moderate tilt reduces wrist strain when using the search dial, and controls are placed at the fingertips. The HyperDeck Shuttle HD is the same height and tilt angle as the ATEM Mini Extreme, so it is perfect for combining and use. The machined search dial features a soft rubber finish that allows inertia to spin and is great for finding many media. It also features buttons similar to traditional broadcast decks. Rear panel features video, power, network, and control connections
- [Master Recorder] Supports H.264, ProRess, DNx files, so you can record a true broadcast master. You can choose audio from PCM or AAC. High quality mastering when used with ATEM Mini Switcher It has all the features you need to send a program to the broadcast station or upload to YouTube
- [MEDIA PLAYER] Equipped with a large search dial, you can easily view the clip library. You can use the button to return to the front clip to allow you to head out the clip. Press the CLIP button to stop playback at the end of the current clip. The ATEM Switcher also allows you to remote control your HyperDeck Shuttle via Ethernet!
- [Conventional Broadcast Deck Control] Equipped with high-speed control panels. The buttons are also similar to traditional broadcast decks. Simply press the recorded button to start recording video in a file. It will be recorded in the file format set in the recording menu. It also has a button that allows you to play, head, and move it to the next clip. Buttons are custom designed exclusively by Blackmagic Design and are of the highest quality. Machined search dial allows you to perform shuttles, jogs, and scrolls, so you can quickly find the clips. All deck control functions can be triggered remotely using an Ethernet network
