DROK Electronic Thermostat Controller, DC 6-30V 24V Digital Temperature Control Board -50 to +110 Degree Celsius High Accuracy LCD Digital Micro Temp Control Switch Module with Waterproof Sensor Probe

Parameter: Power supply: DC6.0~30V or 5V Micro USB Temperature control range: -50?~110? Temperature control precision: 0.1? Measuring input: NTC10K/B3950 Refresh rate: 0.5 second Output type: relay output 10A Probe type: waterproof probe, L: 0.5m Set Parameter: Working mode / setting temperature / hysteresis temperature setting: 1. In the running interface, short press the “SET” button to enter the quick setting interface. 2. After entering the quick setting interface, switch the parameter to be set (working mode/setting temperature/ hysteresis temperature) by short pressing the “SET” button. 3. Change the parameter value by pressing 'UP' or 'DOWN' after select parameter. 4. Hold press “SET” button for more than 3 seconds or have no any button operation for 6 seconds, it will save the parameters and exit the quick setting interface automatically. Set ALA/OPH/OFE (Alarm temperature / delay starting setting / temperature correction:): 1. In the running interface, hold press the “SET” button for more than 3 seconds, enter the parameter setting interface. 2. After entering the parameter setting interface, switch the parameter to be set (alarm temperature/delay starting setting/temperature correction) by short pressing the “SET” button. 3. Use the “UP” “DOWN” button to change the parameter. 4. Hold press “SET” button for more than 3 seconds or have no any button operation for 6 seconds, it will save the parameters and exit the parameter setting interface automatically. Package Including: 1x Electronic Thermostat Controller