QIANRENON HDMI Extender Over Cat5e, RJ45 Ethernet to HDMI Cable 2 Ports Signal Amplifier 100ft 1080P HDMI Cable 30M Sender+Receiver, 2 Ports RJ45

HDMI Male to RJ45 Network LAN Extender 30m Cable Adapter Over Cat 5e/6 1080p up to 30m Extender for HDTV HDPC PS4 STB 4K 2K Specification: HDMI connector: 19Pin male Video signal output: HDMI 1.2a Frequency range: 50 / 60Hz Video expansion bandwidth: 1.65Gbps / 165MHz CAT-6 cable: 30M, 1080p Power consumption: 5W Supported video formats: DTV/HDTV 1080P/1080i/720P/576P/480P/576i/480i Supported resolutions: Interlaced(50/60HZ)?480i,576i,1080i? Uses CAT5e or CAT6 cable to substitute HDMI and achieve long distance transmissions. Supported Resolutions: 480i up to 1080p Supports 1080p Resolution up to at least 100ft (30M) using CAT6 cable, and much further when using lower resolutions No power supply is needed Connection and Operation: 1.Plug the fixed HDMI connector of the sender into the HDMI input source such as: HD-DVD, PS3, STB etc. 2.Connect single Cat 5e or Cat 6 cable (not included)to both the output of the transmitter and input of the receiver. 3.Plug the fixed HDMI connector of the receiver into the HDMI display (such as: HD-LCD, HD-DLP). Uses as a pair (one sender, one receiver). Please note that the device requires running dual CAT5e /CAT6 (not included)cables to establish the connection.One carries data signal and the other carries timing signals. This extender will work with CAT5e cables, but we recommend using CAT6 cables where possible. Also, solid conductor cables carry a stronger signal than their stranded counterparts, so if possible use solid cable. Lastly, shielding isn't required in your patch cables, but if possible we suggest you use them. In conclusion, many cables can get the job done, but the best option is to use a CAT6 Shielded Cable with Solid Conductors especially if you are going to try and max out the distance. Package includes:1 *HDMI Extender Transmitter+1 * HDMI Extender Receiver.