Seco-Larm E-960-D90GQ Twin Photobeam Detector with Laser Beam Alignment, 10ms Interupt Speed, Non-Polarized Power Inputs, Anti-Frost System, NO/NC Trigger Output, Weatherproof, 650nm Laser Wavelength

Seco-Larm E-960-D90GQ Twin Photobeam Detector with Laser Beam Alignment, 10ms Interupt Speed, Non-polarized Power Inputs, Anti-frost System, NO/NC Trigger Output, Weatherproof, 650nm Laser Wavelength ENFORCER Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security, both indoors and outdoors. Key Features Twin beams minimize false alarms from falling leaves, birds, etc. Lensed optics reinforces beam strength and provides excellent immunity to false alarms due to rain, snow, mist, etc. Weatherproof, sunlight-filtering case Non-polarized power inputs Anti-frost system Automatic input power filtering with special noise rejection circuitry NO/NC trigger output N.C. tamper circuit included U brackets included for pole mounting Quick, easy installation with built-in laser beam alignment system Monitored output: N.C. or 10k? resistor on N.O. output Specifications Current Draw: 50mA max (laser align only). 150mA max. (active operation excluding laser alignment) Sensing Range: Outdoor - 90' (30m), Indoor- 190' (60m) Operating Voltage: 12~30 VDC/VAC 60Hz, 200mA Interupt Speed: 10ms LEDs - Red: "ON" indicates transmitter and receiver not aligned or beam is broken LEDs - Yellow: ON indicates weak receiver signal or beam is broken LEDs - Green: ON indicates unit connected to power Alarm Output: SPDT NO/NC/COM relay, 1A@30VDC/VAC Tamper Output: N.C. switch, 1A@30VDC/VAC Case material: PC Resin Laser Wavelength: 650nm Operating Temperature: -13º~+131ºF (-25º~+55ºC) Laser Output Power: <5mW Alignment Angle: Horizontal (+/-)90º, Vertical: (+/-)5º Weight: 2.5-lb (1.1kg)