TENINYU Punch Down Impact Tool Kit with 110 Blade Type for Ethernet Punch Down Block Keystone Jack & Network Wire Cable Repair

A punch down tool, also called a punchdown tool or a krone tool, is a small hand tool used by telecommunication and network technicians. It is used for inserting wire into insulation-displacement connectors on punch down blocks, patch panels, keystone modules, and surface mount boxes (also known as biscuit jacks). The "punch down" part of the name comes from punching a wire into place using an impact action. It consists of a handle, a spring mechanism, and a removable slotted blade. When the punch down tool connects a wire, the blade cuts off the excess wire. To use the punch down tool, a wire is pre-positioned into a slotted post on a punch block, and then the punch down tool is pressed down on top of the wire, over the post. Once the required pressure is reached, an internal spring is triggered, and the blade pushes the wire into the slot, simultaneously cutting the insulation and securing the wire. The tool blade does not cut through the wire insulation to make contact, but rather the sharp edges of the slot in the contact post itself slice through the insulation. The punch down tool blade also is usually used to cut off excess wire, in the same operation as making the connection; this is done with a sharp edge of the punch down tool blade trapping the wire to be cut against the plastic punch block. Specification: Length: 7.35 in Weight: 4.5 ounces