Arducam 1/4 Inch 5 Megapixels Sensor Mini Camera Module with Flex Cable for Raspberry Pi 4B, 3B+, 2B

In order to meet the increasing need for Raspberry Pi compatible camera modules The Arducam team now released another addon spy camera module for Raspberry Pi series boards which is fully compatible with official one The board itself is tiny at around 300mm x 16mm The neck width of the camera module is 6mm this highlight making it perfect for an endoscope spy surveillance or other applications where size and image quality are important It connects to Pi by way of a short ribbon cable The camera is connected to the BCM2835BCM2836 processor on the Pi via the CSI bus a higher bandwidth link which carries pixel data from the camera back to the processor This bus travels along the ribbon cable that attaches the camera board to the Pi The sensor itself has a native resolution of 5 megapixels and has a fixed focus lens onboard In terms of still images the camera is capable of 2592 x 1944 pixel static images and also supports 1080p30 720p60 and 640x480p6090 video It attaches to Pi by way of one of the two small sockets on the board upper surface This interface uses the dedicated CSI interface which was designed especially for interfacing to cameras The CSI bus is capable of extremely high data rates and it exclusively carries pixel data The camera is supported in the latest version of Raspbian Pis preferred operating system Features Angle of View 64 x 48 degrees Fullframe SLR lens equivalent 35 mm Fixed Focus 1 m to infinity Max frame rate 30fps Size 300 x 16 mm flex cable neck wide is 6mm Package including 1pcs Spy Camera Module 14 Inch 5 Megapixel Module with flex cable for Raspberry Pi NOTE Pi Type B Development Board is Not included